ACQUAPAZZA APSO-A7III für die Sony A7 III

ACQUAPAZZA APSO-A7III für die Sony A7 III
ACQUAPAZZA APSO-A7III für die Sony A7 III

Klein – leicht – sensationell ! Für Leute die Präzision bis in`s Detail suchen !
Das Gehäuse besteht aus seewasserfestem Aluminium mit Edelstahl Bedientasten und Knöpfen – alles ist doppelt gedichtet.

Das ACQUAPAZZA APSO-A7III für die Sony A7 III. Alle Funktionen sind exakt zu bedienen. Schräger Monitor Einblick für optimale Kontrolle
Das INON Portsystem kann verwendet werden. Blitzanschluß über Slave am Gehäuse. Optional auch mit Vacuum Check.
Optionales Batteriepack für externe Stromversorgung

Schräger Suchereinblick ! bzw. Monitor – optimal für Video- und Makroaufnahmen
M14 Blindbuchse für Vacuum Check oder Blitzanschluß (oder beides)
Doppelter O-Ring Dichtung
Easy Control mit Stern Buttons – auch für dicke Handschuhe
Monitor Blendschutz Anschluß (UN System)
Mount Base Anschluß T Base
M10x1 Anschluß Gewinde
2 x Sea&Sea Optische Anschlüsse Buchsen 
3 Stativ Gewinde Buchsen 1/4"
Interner Blitz on/off
Record Taste für Videos
Aluminium Seewasserfest 100m Tauchtiefe
Buttons und Schrauben "stainless steel"
Polycarbonat Fenster

Slant Cover
(Sold separately at the time of order. Difference in price.)
Works with the NEX Tilt Monitor.
While underwater the user can arbitrarily change the monitor angle anywhere from 0 ° to 45 °. When looking up in the water, use the 0 ° setting; when shooting downwards, change to the 45 ° setting.
 
Vari-angle grip
The grip angle can be adjusted between 0 ° to 60 °, vertical, or horizontal.
However when it is 0°- 60°angle, it becomes difficult to access the button and dial.
 
Connecting an external battery
It can take a video for a longer time when connected to the external battery instead of the original strobe with micro USB. Both ends of Micro USB cable are ‘L-shaped’.
 
TTL shooting
It can do an accurate TTL shooting by using the original external strobe by Sony.
 
Movie ON/OFF Lever
The lever can be used the upper pull lever or the lower push lever depending on the angle of grip.
 
Clamp ring system’s Gear
The zoom gear and the focus gear are the clamp ring system. There is no slip depending on lens individual differences because it can be adjusted as you like.
 
External strobe power lever
It is possible to turn ON/OFF the genuine strobe HVL-F20M from the outside.
 
φ10 push buttons
As pushing a button of φ8mm while underwater can cause pain to your finger, the buttons have been enlarged. The buttons have also been moved farther apart. The button that is close to the wall and hard to push is angled.
 
Controls are sealed by two sliding O-rings.
The mount port, the gear knob, the push buttons, the focus Knobs and the star-dials etc. are sealed by two sliding O-rings.
The shaft has a polished finish.
Beginning with the first model ever sold, the APSG-DP2, ACQUAPAZZA has polished finishing all their shafts.
 
Double-sealed opening
The horizontal O-ring can be flooded just by floating a little. However, even if there is a gap of 1mm between body and cover, the vertical O-ring will not flood. ACQUAPAZZA has succeeded in developing the stronger double-sealed opening. Regular maintenance assures you of even more worry-free photography.
 
Use at water depth of 0-100m
It is developed to be used at a water depth of no greater than 100m and all elements considered.
It goes without saying that the housing has high strength, and the sliding O-rings are all double-sealed.
 
Flat cover
(Standard)
Both the INON 45° viewfinder unit for the X-2 and the INON viewfinder window unit for the X-2 are attachable.
 
M14/M16 Accessory Ports
There are two accessory ports in the housing. The M14 ports allow communication between the camera and the strobes. (Bulkhead connectors sold separately.) The ports on the M16 also allow connection of an exterior monitor. (You will need an L-shaped HDMI sync cord, an exterior monitor (from SHOGUN), and an underwater housing for the monitor(also from SHOGUN).. Available from other companies at separate cost.)
 
Abmessungen:
Breite 317mm
Höhe 179mm
Länge 190mm (ohne Port)
Gewicht: 2190 Gramm
Tauchtiefe: 100m

User Manual
A two-hole rubber bushing for a sync cord
Hand strap
Spare O-ring
O-ring grease

Lieferumfang:
ACQUAPAZZA APSO-A7 III für SONY A7 III
ohne Port

Wir haben für ACQUAPAZZA diverse Portadapter in verschiedenen Längen und Ausführungen.
Ebenso Zoom und Fokus Gear.

 
Preis: 2.990,00 EUR inkl. 20 % MwSt. zzgl. Versand

INON UWL-100 28M55 Wide Conversion Lens

INON UWL-100 28M55 Wide Conversion Lens
INON UWL-100 28M55 Wide Conversion Lens

Lieferumfang:
INON UWL-100 28M55 Wide Conversion Lens

 
Preis: 380,00 EUR inkl. 20 % MwSt. zzgl. Versand

D&D NAUTICAM N85 Portadapter INON 40mm

D&D NAUTICAM N85 Portadapter INON 40mm

D&D NAUTICAM N85 Portadapter INON 40mm

Port Adapter N85 für den INON Domeport in Kombination mit dem Olympus 8mm Fisheye (und baugleiche)

Extension Lenght: 40mm
Material: Aluminium Eloxal. Saltwater resident



Lieferumfang:
D&D NAUTICAM N85 Portadapter INON 40mm

 
Preis: 330,00 EUR inkl. 20 % MwSt. zzgl. Versand

D&D Panasonic DMW-MCTZ5/TZ7/TZ10 Rotfilter

D&D Panasonic DMW-MCTZ5/TZ7/TZ10 Rotfilter

D&D Panasonic DMW-MCTZ5/TZ7/TZ10 Rotfilter

Lieferumfang:
D&D Panasonic DMW-MCTZ5/TZ7/TZ10 Rotfilter

 
Preis: 79,00 EUR inkl. 20 % MwSt. zzgl. Versand

SAGA 4″ Mini Domeport NAUTICAM N85

SAGA 4" Mini Domeport NAUTICAM N85
SAGA 4" Mini Domeport NAUTICAM N85

Passend für das Nauticam N85 Port System. Panasonic 8mm Fisheye und baugleiche Fisheye Objektive. Für längere Objektive ist ein passender Zwischenring notwendig. Dazu nimmt man die Differenz der Panasonic Optik

 
Preis: 695,00 EUR inkl. 0 % MwSt. zzgl. Versand

ISOTTA Extension Ring 60mm – B102

ISOTTA Extension Ring 60mm - B102
ISOTTA Extension Ring 60mm – B102 

Extension ring with 102 mm bayonet to increase the lenght of the housing's port by the mentioned measure and allow the use of different lenses.

 Black anodized anticorodal aluminum; 
• Double O-Ring seal; 
• Max depth 100 metres;

Included
 Port extension;
• 2 O-Ring seals;

 
Preis: 160,00 EUR inkl. 20 % MwSt. zzgl. Versand

ISOTTA Extension Ring 25mm – B120

ISOTTA Extension Ring 25mm - B120

ISOTTA Extension Ring 25mm – B120 

Extension ring with 102 mm bayonet to increase the lenght of the housing's port by the mentioned measure and allow the use of different lenses.

 Black anodized anticorodal aluminum; 
• Double O-Ring seal; 
• Max depth 100 metres;​

 

 
Preis: 145,00 EUR inkl. 20 % MwSt. zzgl. Versand

CINEBAGS CB76 Tool Kit Bag

CINEBAGS CB76 Tool Kit Bag
CINEBAGS CB76 Tool Kit Bag

The CB76 Tool Kit is a heavy duty case to carry your tool and spare parts

  • heavy duty tarpaulin fabric
  • multiple mesh pouches with zipper
  • oversized zippers
  • neoperene carry handle

size:       24 x 18 x 6,5cm
weight:   424g

 
Preis: 49,00 EUR inkl. 20 % MwSt. zzgl. Versand

INON Shoe Base Ball

INON Shoe Base Ball
INON Shoe Base Ball

Hot Shoe Adapter mit 1" (25.4mm) Kugel. Perfekte Qualität !
Passt auf jedes Gehäuse oder Kamera mit Hot Shoe Base

Lieferumfang:
INON Shoe Base Ball

 
Preis: 33,00 EUR inkl. 20 % MwSt. zzgl. Versand

RETRA Retra *S-TTL* Unterwasser Blitzgerät

RETRA Retra *S-TTL* Unterwasser Blitzgerät
RETRA Retra *S-TTL* Unterwasser Blitzgerät

TECH SPEC:

  • 100W*s
  • GN30 in comparison with two strobes
  • GN18 (measurement on land at ISO100 and 1 meter)
  • Recycle time @100%: 2s (4x eneloop pro)
  • Number of flash @100%, 0.5Hz: 450x (4x eneloop pro)
  • 300 lumen pilot light
  • Pilot light burn time @100%: 3h (4x eneloop pro)
  • 5400K color temperature (4500K with wide angle diffuser)
  • 110º beam angle
  • 9 manual exposure levels
  • S-TTL with +/- 2 F-stop adjustment (** not with Sony Alpha 7)
  • Slave mode with smart pre-flash cancellation
  • 4 level battery indicator for eneloop batteries
  • Electrical connector Ikelite or Sea&Sea
  • Inon and Sea&Sea dual compatible optical connector
  • Length = 120mm
  • Diameter = 102,5mm
  • Weight = 725g (without batteries and accessories, including 1” mounting ball)
  • Underwater weight = -50g
  • -100m depth rating
  • 1 year Retra Warranty

Lieferumfang:
Retra Flash
Retra Diffuser White
Retra Protect Ring

Ball Adapter nicht im Lieferumfang

 
Preis: 855,00 EUR inkl. 20 % MwSt. zzgl. Versand