IKELITE Ersatzzahnkranz für das vordere Einstellrad

IKELITE Ersatzzahnkranz für das vordere Einstellrad
IKELITE Ersatzzahnkranz für das vordere Einstellrad 

für Canon Power Shot S90

Replacement gears for compact digital camera housings.

 
Preis: 10,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Steuerungs- und Push Button Tip-Sortiment für kompakte Digitalgehäuse

IKELITE Steuerungs- und Push Button Tip-Sortiment für kompakte Digitalgehäuse

IKELITE Steuerungs- und Push Button Tip-Sortiment für kompakte Digitalgehäuse


A variety of push button and control tips to replace worn or lost parts for compact digital housings.

 

 
Preis: 15,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE IKELITE Lid Snap Bolzen mit O-Ringen

IKELITE IKELITE Lid Snap Bolzen mit O-Ringen

IKELITE IKELITE Lid Snap Bolzen mit O-Ringen


Used to attach a Locking Lid Snap # 0182 to most Ikelite housings (2 per lid snap). 

 

 
Preis: 10,00 EUR inkl. 20 % MwSt. zzgl. Versand

INON Rubber Bush-M11 Adapter NAUTICAM

INON Rubber Bush-M11 Adapter NAUTICAM
INON Rubber Bush-M11 Adapter NAUTICAM

Anschlußbuchse für NAUTICAM Gehäuse

 
Preis: 9,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Unterwasser Gehäuse für Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR Kamera 200DL

IKELITE Unterwasser Gehäuse für Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR Kamera 200DL

IKELITE Unterwasser Gehäuse für Canon EOS 5D Mark III, 5D Mark IV, 5DS, 5DS R DSLR Kamera 200DL 

A full featured and durable waterproof housing for Canon EOS 5D Mark III, 5D Mark IV, 5DS, and 5DS R DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.

Key Features

200' (60m) depth rating

Housing back is interchangeable with optional lightweight 50' (15m) back (sold separately); the 50' back is lighter weight for travel and perfect for snorkeling, surf, and pool work

Perfect for any wet environment including surf, dive, and pool use

Supremely functional for maximum creative control—access is provided for all important camera functions

The new Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses

Extra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system

Vacuum valve included; Test your system after assembly prior to entering the water; Pump sold separately

Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes

Control symbols are laser etched into the back and will never fade or rub off

Quick install camera mount plate does not need to be removed for battery or memory card access

One spare 1/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories

Includes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately

Signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel

ABS-PC construction is fundamentally corrosion-resistant

Made in the USA; Individually inspected for fit and water pressure tested to depth

1 year limited warranty

TTL Exposure

Install optional CT1K Canon TTL Kit # 46070 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Canon TTL Kit installed, but will not provide TTL exposure.

Non-Ikelite Strobes

SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.

Ikelite Non-Digital Strobes

Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.

Fiber Optic

Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.

Remote Triggering

Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).

Compatibility

This housing is only compatible with cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.

 

Specifications

200' (60m) depth rating

Compatible with DL system lens ports

1/4-20 thread base mounts with 3.5" spacing

Near neutral buoyancy in fresh water

Actual buoyancy varies depending on choice of lens and port

5.1 lb (2.3 kg)

9.2 x 7.1 x 6.5" (234 x 180 x 165 mm)

 

In the Box

Housing

Rear O-ring # 0132.61

Front O-ring # 0132.45

Base with Left-Hand Quick Release Handle # 4077.67

Port Hole Cover # 0200.92

Zoom Gear Retainer # 75900

Waterproof Bulkhead Cap # 9104.5

Silicone Lubricant # 0184.2

Control + Pushbutton Tip Assortment # 9249

1/16" Hex Key # 0945.16

1/8" Hex Key # 0945.18

1 year limited warranty

 
Preis: 1.915,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Unterwasser Gehäuse für Panasonic Lumix GH5, GH5S Spiegellose Micro Four-Thirds Kamera 200DL – Kopie

IKELITE Unterwasser Gehäuse für Panasonic Lumix GH5, GH5S Spiegellose Micro Four-Thirds Kamera 200DL - Kopie

IKELITE Unterwasser Gehäuse für Panasonic Lumix GH5, GH5S Spiegellose Micro Four-Thirds Kamera 200DL 

A full featured and durable waterproof housing for Panasonic Lumix GH5 and GH5S Mirrorless Micro Four-Thirds cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.

Key Features

200' (60m) depth rating

Perfect for any wet environment including surf, dive, and pool use

Supremely functional for maximum creative control—access is provided for all important camera functions

The new Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses

Extra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system

Vacuum valve included; Test your system after assembly prior to entering the water; Pump sold separately

Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes

Control symbols are laser etched into the back and will never fade or rub off

Quick install camera mount plate does not need to be removed for battery or memory card access

One spare 1/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories

Includes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately

Signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel

ABS-PC construction is fundamentally corrosion-resistant

Made in the USA; Individually inspected for fit and water pressure tested to depth

1 year limited warranty

TTL Exposure

Install optional Panasonic TTL Kit # 46031 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Panasonic TTL Kit installed, but will not provide TTL exposure.

Non-Ikelite Strobes

SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.

Ikelite Non-Digital Strobes

Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.

Fiber Optic

Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.

Remote Triggering

Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).

Compatibility

This housing is only compatible with the Panasonic Lumix GH5 and GH5S Mirrorless Cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.

The GH5 camera body is not compatible in older housings for Panasonic Lumix GH3/GH4 cameras.

FL Port Conversion

This housing comes standard with the new Dry Lock (DL) port mount. Ports designed for our Four Lock (FL) or Two Lock DSLR housings are not compatible with this system. This housing can be converted by the user to the FL system by removing the DL mount and adding four # 9072.24 port locks.

The DL mount is not designed to be removed and replaced repeatedly. Conversion back to the DL system at a later time requires return of the housing to Ikelite for re-installation and water pressure testing.

DL ports are considerably lighter weight than the comparable FL versions and support a more robust mount. The DL system is recommended for surf photography.

 

Specifications

200' (60m) depth rating

Compatible with DL system lens ports

Controls are provided for all important camera functions; Controls are not provided for Diopter Adjustment Control, Rear Control Dial, or Mode Dial Lock. Mode Dial must be un-locked prior to installation for use underwater

1/4-20 thread base mounts with 3.5" spacing

Near neutral buoyancy in fresh water

Actual buoyancy varies depending on choice of lens and port

5.1 lb (2.3 kg)

9.2 x 7.1 x 6.5" (234 x 180 x 165 mm)

 

In the Box

Housing

Rear O-ring # 0132.61

Front O-ring # 0132.45

Base with Left-Hand Quick Release Handle # 4077.67

Port Hole Cover # 0200.92

Zoom Gear Retainer # 75900

Waterproof Bulkhead Cap # 9104.5

Silicone Lubricant # 0184.2

Control + Pushbutton Tip Assortment # 9249

1/16" Hex Key # 0945.16

1/8" Hex Key # 0945.18

1 year limited warranty

 
Preis: 1.915,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Unterwasser Gehäuse für Nikon D500 DSLR 50DL

IKELITE Unterwasser Gehäuse für Nikon D500 DSLR 50DL

IKELITE Unterwasser Gehäuse für Nikon D500 DSLR 50DL

A full featured and durable waterproof housing for Nikon D500 DSLR cameras. Suitable for snorkel, surf, pool, and many applications in or around the water.

See images taken with the Nikon D500 DSLR underwater…

This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.

Features

50' (15m) depth rating

Housing back is interchangeable with optional dive 200' (60m) back (sold separately); add the dive back to take this housing to recreational diving limits

Supremely functional for maximum creative control—access is provided for all important camera functions

The new Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses

Extra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system

Vacuum valve included (pump sold separately)

Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes

Control symbols are laser etched into the back and will never fade or rub off

Quick install camera mount plate does not need to be removed for battery or memory card access

One spare 1/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories

Includes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately

Signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel

ABS-PC construction is fundamentally corrosion-resistant

Made in the USA; Individually inspected for fit and water pressure tested to depth

1 year limited warranty

TTL Exposure

Install optional Nikon TTL Hotshoe Product number 46061 and connect the TTL Converter Product number 4301.3 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the TTL Hotshoe and Converter, but will not provide TTL exposure.

Non-Ikelite Strobes

SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.

Ikelite Non-Digital Strobes

Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.

Fiber Optic

Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.

Remote Triggering

Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).

Controls

Shutter-release button
Power switch
Movie-record button
Sub-command dial
Exposure compensation (+/-) button
ISO button
MODE button
WB button
Metering button
BKT button
Lens release button
AF-ON button
Main command dial
Multi selector
Info button
Live view selector
Lv button
Playback button
MENU button
OK button

Compatibility

This housing is only compatible with the Nikon D500 DSLR as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.

 

Specifications

50' (15m) depth rating

Compatible with DL system lens ports

1/4-20 thread base mounts with 3.5" spacing

Near neutral buoyancy in fresh water

Actual buoyancy varies depending on choice of lens and port

4.5 lb (2 kg)

9.2 x 7.1 x 6.3" (234 x 180 x 160 mm)

 

In the Box

Housing

Rear o-ring # 0132.61

Front o-ring # 0132.45

Base with Left-Hand Quick Release Handle # 4077.67

Waterproof Bulkhead Cap # 9104.5

Silicone Lubricant # 0184.2

 
Preis: 1.575,00 EUR inkl. 20 % MwSt. zzgl. Versand