IKELITE Mirrorless Flat Macro Port Extended

IKELITE Mirrorless Flat Macro Port Extended
IKELITE Mirrorless Flat Macro Port Extended



Product Details

A large diameter, extended length flat port for use with larger macro lenses and Ikelite Mirrorless or Compact DSLR Housings. A 67mm threaded front allows for the attachment of external macro lenses or diopters—no separate adapter necessary!



Recommended when using the Canon 60mm Macro with the Ikelite Housing for Canon EOS 100D Rebel SL1. This port can also be combined with the Mirrorless Lens Extension 2.2-inch to use the Canon 100mm IS USM lens.



See Mirrorless Port System section to view lens compatibility for a variety of Mirrorless and Compact DSLR lenses.



Mirrorless Port System

An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.
 
Preis: 250,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Mirrorless Flat Macro Port with 67mm Thread

IKELITE Mirrorless Flat Macro Port with 67mm Thread
IKELITE Mirrorless Flat Macro Port with 67mm Thread



​A low-volume flat port for use with most shorter length mirrorless interchangeable macro lenses. See Mirrorless Port System section to view lens compatibility.Product DescriptionA 67mm threaded front allows for the attachment of external wet lenses. Add an external macro lens for super close-up work of tiny subjects.



The front of the port accepts our standard 3.0-inch diameter color filters, including the yellow barrier filter for fluorescence photography.



Mirrorless Port System

An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.
 
Preis: 240,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Mirrorless Dome Port with Zoom

IKELITE Mirrorless Dome Port with Zoom
IKELITE Mirrorless Dome Port with Zoom

​

An extended dome port providing zoom function for most mirrorless interchangeable zoom lenses when used with the appropriate zoom sleeve. See Mirrorless Port System section to view lens compatibility.Product DescriptionAn optical-grade 6-inch diameter dome allows you to fully take advantage of the angle of view of your lens. Compared to glass, the acrylic front element makes it much lighter weight and easy to pack.



Our unique zoom sleeves are simple and affordable, making it completely painless to use and travel with a variety of lenses. For most lenses, simply install the zoom sleeve between the port and the housing. Then slide your camera into the housing with lens attached. Zoom sleeves are particular to the lens for proper operation. Refer to the next section for information on which zoom sleeve you need for your lens.



Mirrorless Port System

An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.
 
Preis: 350,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Mirrorless Dome Port for Super Wide Angle

IKELITE Mirrorless Dome Port for Super Wide Angle
IKELITE Mirrorless Dome Port for Super Wide Angle

​

A low-volume dome port for use with interchangeable super wide angle and fisheye lenses. See Mirrorless Port System section to view lens compatibility.Product DescriptionAn optical-grade 6-inch diameter dome allows you to fully take advantage of your super wide angle lens. This port is incredibly compact making it easy to shoot close-focus wide angle, when you need to be within inches of your subject. The acrylic front element also makes it lightweight and easy to pack for travel.



A dome shade is not available at this time. A removable shade is in development and details will be posted as soon as they become available.Mirrorless Port SystemAn interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.
 
Preis: 330,00 EUR inkl. 20 % MwSt. zzgl. Versand

IKELITE Housing for Olympus OM-D E-M10

IKELITE Housing for Olympus OM-D E-M10

IKELITE Housing for Olympus OM-D E-M10

It's everything you love about an Ikelite DSLR Housing, shrunk down into a perfectly-sized package for travel. You can impress friends with your photo gear or your photos—the only housing with built-in TTL strobe exposure helps you do both!

Housing shown with Mirrorless Port, not included. Please note that a compatible Mirrorless Port is required for waterproof operation of this Housing. Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.

Fiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.

The camera's built-in flash is not usable in this installation. Non-Ikelite strobes may be attached with the appropriate sync cord and operate non-TTL (manual exposure modes only) with this housing.

An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.

This housing accepts a variety of ports to accommodate zoom, macro, and wide angle lenses from Olympus and Panasonic. See port choices below. Lens port sold separately.

The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. A built-in magnifying viewfinder includes specially optics to provides a clear view of the camera's EVF when wearing a dive mask.

Controls are put right at your fingertips for all important camera functions. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use.

With a system of this caliber, a tray with handle is essential for the attachment of lighting and comfortable handling in a wide variety of shooting scenarios. This housing includes a balanced aluminum tray with our signature quick release handle for easy attachment and removal of strobes and video lights. 

This unique handle is curved slightly to fit the nature curvature of your hand, and features a soft over-mold which makes it a delight to hold. The complete tray and handle detaches

with the removal of two nuts for packing or to attach the optional Tray with Dual Handles.

Special polycarbonate blends allow us to create an extremely strong yet clear and lightweight enclosure. We believe there's no substitute for inspecting the actual o-ring seal once your housing is closed. Our signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Unlike aluminum, polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.

Like every Ikelite product, our housings are designed, built, and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. The average assembly technician is a certified scuba diver and has over 16 years of experience building Ikelite products. We back our products with over 50 years of experience and the most accessible and responsive customer service staff in the dive industry.

This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.


What's Included

Housing

Tray with quick release handle

Waterproof bulkhead cap

Silicone lubricant 1cc tube

1 year manufacturer warranty



Specifications

200 ft (60m) depth rating

All important camera functions are accessible

Ikelite bulkhead connector with built-in TTL circuitry

Slightly negative buoyancy in fresh water

Actual buoyancy varies depending on choice of lens and port

Weight 3.19 lb (1447 g) not including tray, handles or port

Dimensions 6.4 x 7.5 x 5.9 in (163 x 190 x 150 mm) including projections

 
Preis: 890,00 EUR inkl. 20 % MwSt. zzgl. Versand

INON 45° Viewfinder für NAUTICAM Olympus EM Housing

INON 45° Viewfinder für NAUTICAM Olympus EM Housing

INON 45° Viewfinder für NAUTICAM Olympus EM Housing

INON 45° Viewfinder with Special Housing Adapter from D&D Design. Easy for Replace.

Lieferumfang:
INON 45° Viewfinder für NAUTICAM Olympus EM Housing

see Option: 1) include 2) exclude 45° Viewfinder


offizieller Vertragshändler
Europa

 
Preis: ab 790,00 EUR inkl. 20 % MwSt. zzgl. Versand

HUGYFOT Wing/Handles/Ball Mount Set

HUGYFOT Wing/Handles/Ball Mount Set
HUGYFOT Wing/Handles/Ball Mount Set

 
Preis: 110,00 EUR inkl. 20 % MwSt. zzgl. Versand