INON UCL-G165 SD Underwater Wide Close-up Lens

INON UCL-G165 SD Underwater Wide Close-up Lens
INON UCL-G165 SD Underwater Wide Close-up Lens

・A GoPro® is a deep focus camera preventing a subject gets in focus within 60cm/2ft range in theory thus not usable for underwater macro shooting. By using this lens, minimum focus distance underwater will be shorten; the depth of field (DoF) of camera will be 7cm/2.8in~∞(*15) for GoPro® HERO3 or 5cm/2.0in~35cm/1.1ft(*15) for GoPro® HERO3+ enabling high magnification/close-up imaging.

・Measured maximum angle of view of GoPro® HERO3/HERO3+ Black Edition is approx. 151°(*16) on land which will narrow down to approx. 94°(*16) when we put the camera in genuine dive housing and bring it underwater due to different refraction index. The INON UCL-G165 SD is a unique close-up lens providing slightly wide angle of view underwater 110° to have deeper DoF benefitting you with less out-of-focus close range clip which is not possible with standard close-up lens.

・Bayonet INON SD Mount compatible to support friendly and speedy lens exchange underwater.

・Optics is constructed of 2 elements in 2 groups. All elements are made from high refractive index glass lens to minimize whole size dramatically without sacrificing performance.

・Both lens elements have anti-reflection coating on all surfaces to elicit combined master lens performance with less ghost/flare.

・M55 screw mount version will be released later.



UCL-G165 SD specifications (*10)

  • Size: φ77mm (3.0in) x 25.2mm(1.0in)
  • Weight: U/W: approx.121g (4.3oz) Air: 200g (7.1oz)
  • Mount system: INON SD Mount
  • Depth rating: 60m (196.9ft)
  • Material/surface finishing: Corrosion-resistant aluminum alloy/rigid black alumite, PC etc.
  • Lens material/coating: Optical glass/both side coating
  • Depth of field (*17): 7cm/2.8in~∞ (GoPro® HERO3 Black Edition) 
    5cm/2.0in~35cm/1.1ft (GoPro®HERO3+ Black Edition)
  • Lens construction: 2 groups 2 elements

  • Focal length (*18): 165mm(underwater)



(*15)

Measured from “the forefront of the lens” as rated DoF data of GoPro® HERO series is not available preventing to calculate theoretical DoF of this lens.

(*16)

Measured angle of view by INON or calculated angle of view underwater based on the measured angle of view on land. Not confirmed by camera manufacture. The measured angle of view of “Silver Edition” is approx. 142°(air) which is less wide than the “Black Edition”. So angle of view underwater with this lens is less than 110°. (The “White Edition” has not been tested)

(*17)

Measured distance underwater for GoPro® HERO3/3+ Black Edition . Divide by 1.33 for visual distance underwater. Other Edition has not been tested.

(*18)

Standalone focal length of UCL-G165 SD and not combined focal length with camera’s master lens.


 
Preis: 199,00 EUR inkl. 20 % MwSt. zzgl. Versand

INON UFL-G140 SD Underwater Semi-fisheye Conversion Lens

INON UFL-G140 SD Underwater Semi-fisheye Conversion Lens
INON UFL-G140 SD Underwater Semi-fisheye Conversion Lens


・Measured maximum angle of view of GoPro® HERO3/HERO3+ Black Edition is approx. 151° (*11) on land which will narrow down to approx. 94° (*11) when we put the camera in genuine dive housing and bring it underwater due to different refraction index. The INON UFL-G140 SD provides ultra wide semi-fisheye imaging with angle of view 140° underwater enabling wild underwater video work as like using the camera on land.

・Theoretically the depth of field (DoF) of the GoPro® HERO3/HERO3+ Black Edition on land is approx. 60cm/2ft~∞ based on focal length/aperture of camera lens and pixel pitch of the image sensor. With the INON UFL-G140 SD, DoF underwater will be extended to 10cm/3.9in.~∞(*12)/GoPro® HERO3 or 4cm/1.6in~∞(*12) /GoPro® HERO3+ enabling you to shoot at close range to benefit deformed result. (Other Edition has not been tested)

・No vignetting even at FOV setting WIDE (Not compatible with GoPro® HERO3+ Black Edition “SuperView” mode)

・Bayonet INON SD Mount compatible to support friendly and speedy lens exchange underwater.

・Optics is constructed of 4 elements in 4 groups. Rear element is made from high refractive index glass lens to minimize whole size dramatically without sacrificing performance.

・The inner surface of the front acrylic dome has 5 layers multi-coating to deliver quality footage as like a glass dome at budget price.

・M55 screw mount version will be released later.



UFL-G140 SD specifications (*10)

  • Size (including lens hood): φ93.4mm (3.7in) x 41.8mm(1.6in)
  • Weight (including lens hood): U/W: approx.153g (5.4oz) Air: 300g (10.6oz)
  • Mount system: INON SD Mount
  • Depth rating: 60m (196.9ft)
  • Material/surface finishing: Corrosion-resistant aluminum alloy/rigid black alumite, PC etc.
  • Lens material/coating: Optical glass/both side coating, Optical plastic/both side hard coating, inner multi-coating
  • Depth of field (*13): 10cm/3.9in~∞(GoPro® HERO3 Black Edition
    4cm/1.6in~∞(GoPro® HERO3+ Black Edition)
  • Lens construction: 4 groups 4 elements
  • Max. view angle (*14): 140.0°(underwater)
  • Housing or Cage not include



(*11)

Measured angle of view by INON or calculated angle of view underwater based on the measured angle of view. Not confirmed by camera manufacture. The measured angle of view of “Silver Edition” is approx. 142°(air) which is less wide than the “Black Edition”. So angle of view underwater with this lens is less than 140°. (The “White Edition” has not been tested)

(*12)

Measured from “the forefront of the lens” as rated DoF data of GoPro®HERO series is not available preventing to calculate theoretical DoF of this lens.

(*13)

Measured distance underwater for GoPro® HERO3/HERO3+ Black Edition. Divide by 1.33 for visual distance underwater. Other Edition has not been tested.

(*14)

Actual angle of view (actual field of view) varies among different shooting modes.

 
Preis: 339,00 EUR inkl. 20 % MwSt. zzgl. Versand

INON SD Mount Cage HERO3/3+

INON SD Mount Cage HERO3/3+
INON SD Mount Cage HERO3/3+


GoPro® HERO3 / HERO3+ is ultra compact and high quality video camera capturing dominant market share in wearable camera segment thanks to wide range of accessories and handy video editing application “GoPro® Studio” in addition to camera’s performance.

However, when we bring GoPro® camera underwater, angle of view narrows down dramatically due to different refraction ratio and subjects in close range (within approx. 60cm/2ft) are out of focus since GoPro® camera is a deep focus camera (fixed focal length) which prevents it from using for macro imaging.

So we have been studying, developing and finally released dedicated accessories including a semi-fisheye wet lens to deliver nearly same angle of view as on land, a wide close-up wet lens to deliver deep depth of field by slightly increasing angle of view and cage to hold these lenses and arm products.

These newly released products are designed to use mainly for GoPro® cameras with enormously minimized body size to achieve unparalleled portability well beyond conventional camera system.

Also GoPro® camera is a deep focus camera thus users do not have to struggle on focusing through dive mask underwater but concentrate on composition for unique shooting style.

Everyone can enjoy to edit their contents by “GoPro® Studio” without any special technique.





■ Features ■



●SD Mount Cage HERO3/3+

・INON “SD Mount” bayonet system compatible. With “SD Mount”, INON UFL-G140 SD underwater semi-fisheye conversion lens (*7) or UCL-G165 SD underwater wide close-up lens (*7) exclusively designed for an action camera like GoPro® camera can be easily and securely mounted / detached underwater. Off course you can use the SD Mount Cage without any attachment lens (*6). 

・This cage can hold INON “Direct Base III”, “Z Joint” or “Z Adapter MV” at its top/bottom surface.

・Packaged “Male Adapter (GoPro®)” can be attached on top/bottom of the cage to use GoPro® compatible accessories.

・Affordable INON “D Holder” can be directly attached on both sides of the bottom of this cage at different angles in addition to “Grip Base D4”. 

・The tripod screw hole (1/4 inch) on the bottom enables to use tripod/monopod (*8).

・Durable construction machined from an aluminum block protects combined housing.

・Compatible with LCD BackPac, Battery BackPac (*9).

(*1)

Compatible housing is genine “Dive Housing (60m/197ft)”. The “Standard Housing (40m/131ft)” packaged with “GoPro® HERO3+” is not compatible. (“GoPro® HERO3” is packaged with the “Dive Housing”)

(*2)

When using on land, set FOV mode other than [Wide] or use without the SD Mount Cage to prevent vignetting observed mainly in Ultra Wide mode even without an attachment lens. (No vignetting underwater)

(*3)

Designed only for underwater use. (When using on land, distant subject is not in focus and angle of view is not as wide as rated)

(*4)

Designed only for underwater use. (When using on land with FOV setting [WIDE], vignetting will be observed)

(*5)

Not usable for [SuperView mode] of GoPro® HERO3+ Black Edition as this mode adds software-based deformation effect enhancing more aberrations when using an attachment lens.
(*6)

When using on land, set FOV mode other than [Wide] or use without the SD Mount Cage to prevent vignetting observed mainly in Ultra Wide mode even without an attachment lens. (No vignetting underwater) 

(*7)

UFL-G140 SD and UCL-G165 SD are designed for underwater use only and not usable on land. 

(*8)

Depending on tripod head design, some tripod/monopod may not fit to this product. Check if your tripod head can hold this product before actual use. 

(*9)

An optional LCD BacPac is recommended to check live view even it will shorten battery life. When using an LCD BacPac, it is recommended to prepare spare battery and use fully charged battery for every tank.

(*10)

Subject to change without prior notice.





SD Mount Cage HERO3/3+ specifications (*10)

  • Size (excluding protruded parts): 88.5mm/3.5in.(W)×79.9mm/3.1in.(H)×51.3mm/2.0in.(D)
  • Weight: 207g/7.3oz (air) / approx.128g/4.5oz (underwater)
  • Material/finishing: Corrosion-resistant aluminum alloy/rigid alumite, POM etc.
 
Preis: 139,00 EUR inkl. 20 % MwSt. zzgl. Versand

D&D NB Pro Housing for Olympus OM-D E-M1 with 12-50mm Lens

D&D NB Pro Housing for Olympus OM-D E-M1 with 12-50mm Lens
D&D NB Pro Housing for Olympus OM-D E-M1 with 12-50mm Lens

■ Support Zoom function
Depth Rating 40m
Dual Silicone O-ring
■ Improved latch for longer usage
■ includes: Manual, Handstrap, Spare O-ring, Silicon Grease, Port Cap
size: 250 x 190 x 150mm

Notice:
■ The port is dedicated to 12-50mm, 12-40 and Macro 60mm Lens. It can not be changed.

Lieferumfang:
D&D NB Pro Housing for Olympus OM-D E-M1 with 12-50mm Lens
Handstrap, Spare O-ring, Silicon Grease, Port Cap

 
Preis: 299,00 EUR inkl. 20 % MwSt. zzgl. Versand

D&D NB Pro CANON EOS 5D Mark III Unterwassergehäuse

D&D NB Pro CANON EOS 5D Mark III Unterwassergehäuse
D&D NB Pro CANON EOS 5D Mark III Underwater Housing

Underwater Housing Support the important Function from the Camera, but no Port System for Change and only Standard Lens 24-105 with Zoom Function. Low Budget Housing with good Function

Diving Deep 40 Meter

Lieferumfang:
D&D NB Pro CANON EOS 5D Mark III Underwater Housing
O-Ring, Silicon, Handstrap, Silicat;

 
Preis: 499,00 EUR inkl. 20 % MwSt. zzgl. Versand

D&D NB Pro Canon G1X Mark II Unterwassergehäuse

D&D NB Pro Canon G1X Mark II Unterwassergehäuse

D&D NB Pro Canon G1X Mark II Unterwassergehäuse

Kompaktes und handliches Unterwassergehäuse. Alle wichtigen Funktionen sind zu bedienen, 67mm Frontgewinde für Filter und Makrokonverter (kein Weitwinkel). Zwei Slave Kabel Blitzbuchsen für Sea&Sea Stecker (7mm)

Depth Rating 40m
All Silicone O-ring
Improved latch for longer usage
includes: Manual, Handstrap, Spare O-ring, Silicon Grease, Diffuser
Front Port 67mm for use Redfilter and Macro Lens Konverter or Flip Diopter Holder

Lieferumfang:
D&D NB Housing Pro Version for Canon G1X Mark II
Silikon, Handschlaufe, Silikat Gel;

 
Preis: 299,00 EUR inkl. 20 % MwSt. zzgl. Versand

D&D NB Pro Canon G1X Gehäuse – Kopie

D&D NB Pro Canon G1X Gehäuse - Kopie

D&D NB Housing Pro Version for Canon G1X

The new G1X Pro Housing. with 67mm Flip Lens Adapter (for use with Macrolens)
This Housing has better Quality than the Original Canon Housing

NB Housing for Canon G1 X
■ Depth Rating 40m
More reliable than Canon WP-DC44 (Thicker case)
■ All Silicone O-ring
■ Improved latch for longer usage
■ includes: Manual, Handstrap, Spare O-ring, Silicon Grease, Diffuser

 

 
Preis: 249,00 EUR inkl. 20 % MwSt. zzgl. Versand